•Better used indoors：Laser products are recommended for indoor use. Avoid direct sunlight when you use the outdoors, as strong sunlight weakens the laser energy and can affect accuracy and measurement range.
•360° Green Laser Source: 360° Horizontal beam easily projects a line covering the wall and ceiling. It projects bright horizontal, vertical & cross lines onto flat surfaces; Green laser is 3 times brighter than red laser with the same light source and gives you maximum green laser brightness up to 100 ft with high accuracy
•Bonus Laser Level Tripod: The Tripod can expand to 37-1/2 inch helps you adjust the position of the laser for maximum accuracy. It closed height of 17 inch, easy to store; Combined with a standard 1/4" quick-release plate, you can install and remove the laser level in seconds
Expansion Angle: Vertical Beam Spread Covers wider angle - An expansion angle easily projects a vertical line from the floor to the ceiling. Class II laser product, maximum laser output < 1mW
•Dual Power Modes & Universal Usage: PREXISO laser level has a Type-C power interface. When the battery is taken out, the laser tool can be used by direct plugging or power bank.
Rotatable 360° magnetic mounting base to assemble with the 1/4"-20 treaded mount at the bottom of the tool. PREXISO line laser dustproof, wear-resistant, cold, and high temperature. Covered by TPE soft rubber for shock-resistant and comfortable grip
•Self-Leveling & Manual Mode: With the switch to the "UNLOCK" side, the tool is in self-leveling mode, which means the tool will level itself if it is within ±4° of horizontal. If the surface tilt more than 4 degrees, If the surface tilt more than 4 degrees, the laser will blink as an alarm; Slide the switch to "LOCK" side and press the button for 3sec to turn on the laser in manual mode, the self-leveling feature is disabled and lock lines for alignment to any angles
•Multipurpose & Wide Application: PREXISO line laser can cover the room's surrounding floors, walls, and ceilings. The horizontal and vertical lines intersect at an angle of 90° to help you quickly visualize and complete the square layout; Suitable for floor and wall tiling, chandelier, spotlight installation, hanging wall draws, air condition installation, door & window calibration, building structure measurement; Class II laser product, maximum laser output < 1mW
| Laser | λ=510-530 nm, Class II laser, maximum laser output<1mW |
| Operating range (typically) | 100FT/30M(under 100LUX indoor environment) |
| Accuracy (typically) | ±3mm@10m (±1/8" @32ft ) |
| Self-leveling range | ±4°±1° |
| Estimated battery life | >4h |
| Optimum operating temperature | 14°F to 104°F (-10°C to 40°C) |
| Storage temperature | -4°F to 140°F (-20°C to 60°C) |
| Batteries | 3 x 1.5V alkaline AA |
